Reinitialize your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected performance. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few steps.

• First ensuring your red dot sight is powered on.
• Find the small reinitialize button on the side of the unit.
• Utilize a small object to activate the reset lever for approximately 7 seconds.
• Release the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• The red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it back to standard configuration is a breeze. First, determine the tiny button on the bottom of your optic. Then, sustain it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for accurate shooting.

restore Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Hold down the power button for approximately 5 seconds.
• The display will flash, indicating that the reset is successfuly initiated.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and test your sight's functionality. If you encounter any further troubles, don't hesitate to contactHolosun's customer support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• Initially, Turn on your Holosun EPS Carry by pressing the power button.
• Subsequently, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, tap the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reset your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will return your sight to its factory settings, clearing any altered configurations you've made. To accomplish this reset, observe these website straightforward steps:

• First, locate the reset button on your EPS Carry.
• Next, press a fine object, like a paperclip, to depress the reset button.
• As you hold the reset button activated, power on your EPS Carry.
• The sight will blink a message indicating that the reset is complete.

Once the reset is successful, your EPS Carry will be back to its factory settings.

Report this wiki page